Precision Medical

The unique modular design makes repair a breeze for any biomed or central supply department. The unit is made up of six (6) easy-to-replace modular components. Unlike the normal plastic inlet and outlet connections on most units, the cast metal backplate connections are extremely durable, thereby saving unnecessary repair costs. As a result of its modular design, the unit is 25-50 percent smaller than other suction regulators making it the product of choice for crowded wall and rail areas. The case is made of strong ABS plastic. It features a smooth surface with rounded corners making cleaning easy. The case also houses the gauge for extra protection. The large control knob with its three (3) easy-to-read settings make vacuum adjustments simple, even in emergency situations. Specifications: * Gauge Range: PM3300: 0-200mmHg - Full Vacuum PM3300HV: 0-300mmHg - Max Vacuum PM3400: 0-150mmHg * Gauge Accuracy: Analog: ± 5% of Max Digital Gauge: ± 1% of Full Scale Analog Gauge: ± 5% of MAX within ref. indicator * Vacuum Ports: 1/8 NPT Female * Modes: LINE, OFF, REG * Maximum Vacuum: PM3300: REG. Mode @ Full Vac - 396 mmHg PM3400: Restricted to 170 mmHg (23 kPa) ± 10 mmHg * Weight: 1.1 lbs * Dimensions: 3.7in L x 2.8in W x 5.2in H * Battery: 3 Volt Lithium, ½ AA (Digital Vacuum Gauge Models ONLY)

Flow Selector features include: * DISS Female Hand Tight Inlet * 2 Tubing Barb Outlets * 1 DISS Male Connection Outlet

The polycarbonate housings are extremely durable and impervious to chemical solutions normally used in a clinical setting preventing clouding and spidering. The polycarbonate flow tubes ensure durability. These flowmeters use black glass flow indicator balls with an exceptional sphericity and uniform weight contribute to a more accurate flowmeter than those using plastic floats. The highly accurate needle valves ensure precise flow-settings the first time...every time. The flow control knob is on the front of the flowmeter in clear sight of the operator unlike side mount knobs which are susceptible to damage during installation of additional equipment. The black glass float makes the flow setting easy to read. Specifications: * Scale: 0-15 LPM * Increments: * 0.5 LPM from 0.5 to 5 LPM * 1 LPM from 5 to 15 LPM * Accuracy: * ±0.25 LPM from 0.5 to 5 LPM * ±0.5 LPM above 6 to 15 LPM * Flush Flow: 60-80 LPM * Available with a variety of configurations (see item names and specifications)

The compact flowmeter's polycarbonate housing extends over the lightweight aluminum body providing superior durability. The housing is impervious to chemical solutions normally used in a clinical setting. The state of the art housing incorporates a white background that makes the flow settings easier to read. The contemporary design results in a smaller unit that fits more easily into space-cramped wall rails. Unlike side mounted knobs which are susceptible to damage, the flow control knobs are on the front of the flowmeter in clear sight of the operator. The flowmeters use black glass flow indicator balls. The properties of black glass, superior sphericity and exceptionally uniform density, insure that the flowmeter is more accurate then flowmeters utilizing plastic floats. Variety of options available. Specifications for 0-8 LPM Models: * Scale: 0-8 LPM * Increments: 0.5 LPM (starts at 0.5 LMP) * Accuracy: ±0.25 LPM * Flush Flow: 40-60 LPM Specifications for 0-15 LPM Models: * Scale: 0-15 LPM * Increments: 0.5 LPM from 0.5 to 5 LPM 1 LPM from 5 to 15 LPM * Accuracy: ±0.25 LPM from 0.5 to 5 LPM ±0.5 LPM above 6 to 15 LPM * Flush Flow: 40-60 LPM

Vacuum Quick Connect Adapter has a maximum pressure rating of 200 PSI.

Evacuation/WAGD Quick Connect Coupler has a maximum pressure rating of 200 PSI.

The unique modular design makes repair a breeze for any biomed or central supply department. The unit is made up of six (6) easy-to-replace modular components. Unlike the normal plastic inlet and outlet connections on most units, the cast metal backplate connections are extremely durable, thereby saving unnecessary repair costs. As a result of its modular design, the unit is 25-50 percent smaller than other suction regulators making it the product of choice for crowded wall and rail areas. The case is made of strong ABS plastic. It features a smooth surface with rounded corners making cleaning easy. The case also houses the gauge for extra protection. The large control knob with its three (3) easy-to-read settings make vacuum adjustments simple, even in emergency situations. Specifications: * Bottom Connection (inlet) - Tubing Nipple * Gauge Range: 0-300mmHg - Full Vacuum * Gauge Accuracy:Analog: ± 5% of MaxDigital Gauge: ± 1% of Full ScaleAnalog Gauge: ± 5% of MAX within ref. indicator * Maximum Vacuum:REG. Mode @ Full Vac - 396 mmHg * Weight: 1.1 lbs. (.48 kg) * Dimensions: 3.7 in. (9.4 cm), 2.8 in. (7.1 cm), 5.2 in. (13.2 cm)

Key benefits: * Hydrophobic * Replacement Part for Easy Vac PM60

Easy Dial Reg Oxygen Regulator features include: * Large Visible Flow Rate Settings * Knurled Adjustment Knob * Ergonomically Correct Plastic T Handle * Lightweight Aluminum Body and Cap * Gauge Protector * Hose Barb Outlet

Rear case cover for PM 3300/3400 series vacuum regulators.

Easy Air Compressor features include: * Flow Gauge * J Bracket * Hospital Grade Cord * 120 VAC, 60 Hz, 5 Amps * 16.0 L x 7.3 W x 10.3 H-inch * 20.4 lbs

Vacuum Quick Connect Wye features include: * Ohmeda Wye Block Assembly - 2 Ohmeda Couplers * Maximum Pressure - 200 PSI * Primary Check Only

The unique modular design makes repair a breeze for any biomed or central supply department. The unit is made up of six (6) easy-to-replace modular components. Unlike the normal plastic inlet and outlet connections on most units, the cast metal backplate connections are extremely durable, thereby saving unnecessary repair costs. As a result of its modular design, the unit is 25-50 percent smaller than other suction regulators making it the product of choice for crowded wall and rail areas. The case is made of strong ABS plastic. It features a smooth surface with rounded corners making cleaning easy. The case also houses the gauge for extra protection. The large control knob with its three (3) easy-to-read settings make vacuum adjustments simple, even in emergency situations. Specifications: * Gauge Range: PM3000: 0-200mmHg PM3000HV: 0-300mmHg PM3100: 0-200mmHg PM3100HV: 0-300mmHg PM3500: 0-150mmHg PM3500E 0-200mmHg * Gauge Accuracy: Analog: ± 5% of Max Digital Gauge: ± 1% of Full Scale Analog Gauge: ± 5% of MAX within ref. indicator * Vacuum Ports: 1/8 NPT Female * Modes: PM3100 Series: LINE, OFF, REG PM 3000 & PM3500 Series: OFF, REG * Maximum Vacuum: PM3000 & PM3100: REG. Mode @ Full Vac - 396 mmHg PM3500D: Restricted to 170 mmHg (23 kPa) ± 10 mmHg PM3500E: Restricted to 160 mmHg (21 kPa) ± 10 mmHg * Weight: 1.1 lbs * Dimensions: 3.7 in L x 2.8 in W x 5.2 in H * Battery: 3 Volt Lithium, ½ AA (Digital Vacuum Gauge Models ONLY)

HeliOx Regulator is an accessory part.

O2 Quick Connect Compact Wye has a maximum pressure rating of 200 PSI.

EasyGoVac Aspirator Unit features include: * ABS plastic cabinet is durable, attractive, easy-to-clean and infection control friendly * Dual pump protection system features two safeguards: float shut-off in the canister to protect overflow and an inline hydrophobic filter to prevent back flow of fluid as well as airborne contaminants from entering the pump * 800 cc Canister * Carrying Bag * Filter Assembly (if included) * Filter * 6-ft Tubing * Elbow * Battery Charger/Power Supply and/or DC Cord

Neb treatments, resuscitation bags or equipment power are all available with this unique product. All equipment can be kept connected and ready for use when needed. You simply need to push the switch from OFF to ON to deliver a neb treatment or to utilize a resuscitation bag.

EasyVac Aspirator Suction Units provide reliable and safe suction of fluids, using up to 635 mmHg of vacuum. The EasyVac provides additional safety to guard against the suction canister from overflowing. At a little over 11 pounds, the lightweight device is easy to transport and store. The unit won't overheat due to a resetting thermal limit switch and the vacuum gauge is positioned horizontally. This allows the user to easily view it while standing above. The unit is available in two power cord options: a 2-prong Power Cord and a 3-prong Hospital Grade Power Cord. Features: * Lightweight at only 11.4 lbs * Built to resist accidental knocks and bumps due to a durable design * Horizontal suction gauge for easy and comfortable reading * Securely hold the unit to a flat surface with suction feet * Replaceable inline hydrophobic bacteria filter * Suction canisters: 800cc (disposable with float shut-off) * Operating Vacuum Range: 0-635 mmHg

Yoke Seal features include: * Neoprene * Brass outer ring

O2 Quick Connect Adapter has a maximum pressure rating of 200 PSI.

Vacuum Quick Connect Wye features include: * Chemetron Wye Block Assembly - 2 Chemetron Couplers * Maximum Pressure - 200 PSI * Primary Check Only

Vacuum Quick Connect Adapter has a maximum pressure rating of 200 PSI.

Filter Assembly is a replacement part as detailed in user manual.

No additional details available at this time.