Ventilation Tubing & Accessories

Philips Non-Invasive (NIV) Disposable Non-Heated Circuit features a single-limb, non-heated passive circuit with a swivel exhalation port and machine-side filter. Features: * Adult * 22mm * Non-heated * Swivel exhalation port * Machine-side filter Use with Philips NIV Devices: * Use with Trilogy 202, V30, BiPAP Focus, EV300 without modifications * Use with V60 or BiPAP Vision a proximal pressure line must be added

Disposable Exhalation Port (DEP) features include:* Ventilation circuit accessory* Does not include filter

The Superset range of catheter mounts have a concertina design to allow for positioning control. This allows the catheter mount to be set in any required position. The design allows the adjustment of deadspace from 20ml to 40ml (code 3504: 15-36ml) and the adjustment of length from 70mm to 150mm, excluding connectors (code 3504) for total control. The range is available with fixed and swivel elbows and a variety of ports for all applications. All Intersurgical port caps are retainable for safety; fixed to the port connectors to ensure that they cannot be misplaced in use. Flip top cap with 7.6mm port - for connection of all standard 7.6mm probes or suctioning. Luer ports - for secure attachment of gas sampling lines with luer lock fittings. Double flip top cap with seal - opening the first tab on the cap allows for the introduction of a fibre optic bronchoscope whilst maintaining airway pressure. Opening the second tab allows for suctioning if required.

Standard exhalation port to one that accepts a filter.

Pneupac Parapac Plus Carrying Case * Orange * Not MRI Compatible

Control Knob is a replacement part for paraPAC® Ventilator.

Exhalation Port features include:* 22 mm OD x 15 mm ID* Disposable

Low compliance Single and Dual heated wire breathing systems for Invasive and Non-Invasive therapies, delivering gas at optimal humidity and temperature to patients requiring respiratory support. All Heated Wire Breathing Systems limbs feature a double coiled heated wire configuration providing a consistent warming of gas flow and limb wall minimizing possible rain-out. Features: * Available with multiple components * Sterile packed breathing systems * Double coiled heated wires

The Double Valve Auto-Fill Humidification Chamber is part of a complete system to warm and humidify inspired respiratory gases delivered to ventilated patients and those receiving respiratory support. The chamber is used in conjunction with a respiratory humidifier, breathing circuits and other accessories such as CPAP masks, high flow cannulas and nasal CPAP accessories. Features: Improved Responsiveness The lower water capacity enables rapid achievement of optimum operating temperature and minimizes fluctuations. Highly Compatible 22mm connectors allow compatibility with a wide range of ventilator circuits. Gas Flow Diverters Flow diverters optimize gas flow through the chamber, maximizing efficiency of warming and humidification of the gases. Heat Transfer Flat aluminium base for efficient, rapid and responsive water heating. Clear Construction Transparent construction with red floating fill indicator and clear markings for quick and easy monitoring of the water level. Compatible with Oscillating Ventilators The humidifier chamber is tested and performs with oscillating ventilators used in neonatal treatment. Overfill Protection Flexicare's Double Valve Auto-Fill Humidification Chamber features two independent floats and a primary and a secondary seal to regulate the flow of water into the chamber and provide assured protection against overfilling.

Tubing fits instruments made by Collins, Jaeger, Medical Graphics, Sensormedics. Tubes are individually bagged, clean - not sterile. Tubes made from ethylene vinyl acetate, contain no latex. Temperature range from -35 deg C to +60 deg C.

A range of self-sealing and right-angled, self-sealing water traps that allow for emptying during use. As the base of the water trap is opened the internal valve automatically closes ensuring the breathing system remains airtight. As the base is replaced, the valve reopens allowing drainage of the breathing system to recommence. The right-angled version is ideal for use in applications where a 90º attachment may be required.

Disposable Patient Valve to be used with* paraPAC Ventilator* ventiPAC Ventilator

Corrugated Tubing is blue in color and segmented.

PEV features include:* Patient Interface Accessory* Reusable

Gas Input Hose designed for use with: * paraPAC™ and ventiPAC™ ventilators * babyPAC™ ventilators

One-Way Valve features include:* 15 mm ID x 22 mm OD* Non-Sterile* Disposable

The Dual Limb Hanger for 22mm Tube is a roll stand accessory and to be used with the Trilogy EVO. It attaches to the circuit arum support. Features: * For use with Trilogy EVO * Designed for 22mm tubing * Roll stand accessory

This pressure valve is an O2 accessory part to be used with the Philips BiPAP / CPAP Vision units. It is available as a single (each) item or a pack of 5. Features: * Oxygen Accessory Part * Use with Philips BiPAP / CPAP Vision Units

The USB to DB9 Patient Monitor Interface Cable interfaces the EV300 with a hospital monitor such as the Alice 6 PSG System, or with a computer that is running Omnilab Direct. It is an isolated cable with a USB to DB9 connectors Features: * Isolated * USB to DB9 * Use with the EV300

Protective Cap features include:* 22 mm ID* Non-Sterile* Accessory Part

Carrying Case features include:* Electric Blue* Black Shoulder and Carry Straps* Molded Hangers for Stretchers

Carrying Case features include:* Electric Burgundy* Black Shoulder and Carry Straps* Molded Hangers for Stretchers

Circuit Support Arm features include:* Accessory Part* Supports Patient Circuit

Passive bilevel breathing systems are available in Smoothbore tubing as they offer a perfect solution for dry, high-flow gas. Features: * Multiple tubing lengths * Choose between ports or connector