High-Performance Nebulizers

Curaplex® humidification and nebulization solutions are the economical answer to your high flow oxygen therapy challenges. This nebulization technology offers a high flow feature with a wide FiO2 range and features a 40 lpm jet, which even at elevated oxygen concentration settings provides sufficient total flow for the majority of patients. These products achieve high flows and high FiO2 ranges without the time and expense of "doubling up" nebulizers. The FiO2 dial settings, ranging from 36% to 95%, minimize the need to change devices to wean your patients, providing another time and cost-saving advantage. Features: * Delivery of particulate humidity in the 3 to 5 micron range * Normal flow LVN delivers FiO2 of 28-60% with a total flow range of 24 to 68 LPM * High flow LVN delivers FiO2 of 36-95% with a minimum total flow of 43 LPM * Compatible with your existing supply of sterile water California Proposition 65 Warning: ⚠ WARNING: This product may use 'Clear Vinyl” in the manufacturing process and therefore may contain one or more chemicals on the Prop. 65 chemical list which are known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

The Aerogen® Solo offers a hands-free, high performance aerosol drug delivery system which provides optimal patient care. * Operates with ventilated and non-ventilated patients when coupled with the Aerogen Ultra. * Does not heat or degrade medication. Suitable for solutions, suspensions, proteins and peptides. * Single patient use for up to 28 days intermittent or 7 days continuous. * Powered by the Aerogen Pro-X Controller for continuous use or the Aerogen USB Controller for intermittent use. Aerogen® Solo Convenience Kit includes: * Aerogen Solo Nebulizers * T-piece plugs REFERENCES: * Ari A. Practical strategies for a safe and effective delivery of aerosolized medications to patients with COVID-19. Respir. Med. 2020; 167. doi:10.1016/j.rmed.2020.105987. * Miller A, Epstein D. Safe bronchodilator treatment in mechanically ventilated COVID-19 patients: A single center experience. J. Crit. Care. 2020; 58: 56–57. * Fink JB, Ehrmann S, Li J, Dailey P, McKiernan P, Darquenne C et al. Reducing Aerosol-Related Risk of Transmission in the Era of COVID-19: An Interim Guidance Endorsed by the International Society of Aerosols in Medicine. J Aerosol Med Pulm Drug Deliv 2020; : jamp.2020.1615. * O'Toole C, McGrath JA, Joyce M, Bennett G, Byrne MA, MacLoughlin R. Fugitive Aerosol Therapy Emissions during Mechanical Ventilation: In Vitro Assessment of the Effect of Tidal Volume and Use of Protective Filters. Aerosol Air Qual Res 2020; 20. doi:10.4209/aaqr.2020.04.0176. * Halpin DMG, Criner GJ, Papi A, Singh D, Anzueto A, Martinez FJ et al. Global Initiative for the Diagnosis, Management, and Prevention of Chronic Obstructive Lung Disease: The 2020 GOLD Science Committee Report on COVID-19 & COPD. Am J Respir Crit Care Med 2020. doi:10.1164/rccm.202009-3533SO. * Joyce M, McGrath JA, Mac Giolla Eain M, O'Sullivan A, Byrne M, MacLoughlin R. Nebuliser Type Influences Both Patient-Derived Bioaerosol Emissions and Ventilation Parameters during Mechanical Ventilation. Pharmaceutics 2021; 13: 199. PM951

This product is part of the Aeroverse System from Monaghan. AeroEclipse® II Breath Actuated Nebulizer (BAN) features includes: * Built-in mode selector provides convenient, easy selection of Breath actuated and Continuous operational modes. Green "feedback" button signals actuation and provides a visual assist to proper use and breathing technique. * Diaphragm and grid system enhance actuation sensitivity thereby lowering triggering point–only 15 LPM of inspiratory effort is required to trigger the device. * Mouthpiece can be removed and replaced with Monaghan Medical's disposable or reusable masks, or can be used with an elbow mask adapter to accommodate any standard aerosol mask. * One-way exhalation valve virtually eliminates the mixing of inspirate and expirate. * Ergonomic size and shape fit comfortably in the hand. Clarified polypropylene allows easy visualization of molded-in fill lines. * Molded-in fill lines 0.5 ml to 6 ml. * One-quarter turn assembly firmly attaches top to cup. * Air entrainment through the back of the nebulizer conditions the aerosol and improves delivery of fine particle mass.

The Aerogen® Solo offers a hands-free, high performance aerosol drug delivery system which provides optimal patient care. * Operates with ventilated and non-ventilated patients when coupled with the Aerogen Ultra. * Does not heat or degrade medication. Suitable for solutions, suspensions, proteins and peptides. * Single patient use for up to 28 days intermittent or 7 days continuous. * Powered by the Aerogen Pro-X Controller for continuous use or the Aerogen USB Controller for intermittent use. Replacement nebulizer designed for Aerogen® Solo.

The Aerogen Ultra is an accessory specific to the Aerogen Solo nebulizer. It facilitates intermittent and continuous nebulization and optional supply of supplemental oxygen to pediatric and adult patients via mouthpiece. The device can alternatively be used with a facemask, which is not provided. It is a single patient use device which can be used for the delivery of solutions, suspensions, proteins and peptides at all stages of patient care. Features: * Oxygen tubing provided * Ergonomic valved mouthpiece for optimal aerosol delivery * Fits all standard aerosol masksREFERENCES: * Ari A. Practical strategies for a safe and effective delivery of aerosolized medications to patients with COVID-19. Respir. Med. 2020; 167. doi:10.1016/j.rmed.2020.105987. * Miller A, Epstein D. Safe bronchodilator treatment in mechanically ventilated COVID-19 patients: A single center experience. J. Crit. Care. 2020; 58: 56–57. * Fink JB, Ehrmann S, Li J, Dailey P, McKiernan P, Darquenne C et al. Reducing Aerosol-Related Risk of Transmission in the Era of COVID-19: An Interim Guidance Endorsed by the International Society of Aerosols in Medicine. J Aerosol Med Pulm Drug Deliv 2020; : jamp.2020.1615. * O'Toole C, McGrath JA, Joyce M, Bennett G, Byrne MA, MacLoughlin R. Fugitive Aerosol Therapy Emissions during Mechanical Ventilation: In Vitro Assessment of the Effect of Tidal Volume and Use of Protective Filters. Aerosol Air Qual Res 2020; 20. doi:10.4209/aaqr.2020.04.0176. * Halpin DMG, Criner GJ, Papi A, Singh D, Anzueto A, Martinez FJ et al. Global Initiative for the Diagnosis, Management, and Prevention of Chronic Obstructive Lung Disease: The 2020 GOLD Science Committee Report on COVID-19 & COPD. Am J Respir Crit Care Med 2020. doi:10.1164/rccm.202009-3533SO. * Joyce M, McGrath JA, Mac Giolla Eain M, O'Sullivan A, Byrne M, MacLoughlin R. Nebuliser Type Influences Both Patient-Derived Bioaerosol Emissions and Ventilation Parameters during Mechanical Ventilation. Pharmaceutics 2021; 13: 199. PM951

AeroEclipse® Reusable Breath Actuated Nebulizer (R BAN) features includes: * Green Feedback Button - Signals actuation and provides a visual assist to proper use and breathing technique * Mode Selector - Convenient selection of breath actuated or continuous operation modes * AeroControl™ System Regulator - Patented system enhances breath actuation sensitivity to only 15 LPM of inspiratory effort to trigger the device * One-Way Exhalation Valve - Aids in maximum aerosol delivery with every breath by virtually eliminating the mixing of inspirate and expirate * Air Entrainment - Conditions the aerosol to improve delivery of fine particle mass

The Aerogen Ultra with filter demonstrates no increase in aerosol emissions that are exhaled compared to baseline. It reduces the number of treatments and bronchodilators used for symptom control with minimal medication left in the cup and simplifies the workflow with no added flow required. With the Aerogen Ultra and filter, 6 times more medication is delivered to the lungs versus JN. Patient response to treatment and sustained airflow over time improves. Aerogen Ultra with Filter (item # 06-AG-AS7009-US) includes: * Aerogen Solo Adapter * Filter * Mouthpiece * Tubing Aerogen Ultra Starter Kit (item # 06-AG-AS7509-US) includes: * Aerogen Ultra * Aerogen Solo nebulizers * Filter * Oxygen Tubing , 7ft

Designed for ease of use, the Aerogen USB Controller allows Aerogen nebulizers to travel with the patient, ensuring optimum care.

The Cirrus™2 Nebulizer is based on the well-established Cirrus nebulizer, yet it incorporates several improved features. These features include a graduated nebulizer cup to provide guidance on how much medication is in the nebulizer. The cup, in turn, now has a quick release fitting to enable the nebulizer to be attached and detached with a quarter turn. This speeds up the filling process and provides a reliable seal between the cup and the nebulizer body. The Cirrus™2 mask kits incorporate the Intersurgical EcoLite™ aerosol mask, this non-PVC mask reduces the environmental impact of this product. Features: * Quick release fitting for easy attachment and detachment of the cup to nebulizer * Standard 22ID Taper fits masks, T-pieces, and mouthpieces * Graduated nebulizer cup guide for faster preparation * Low residual volume reduces medication waste

Empty nebulizer 04-002002EA has FiO2 settings adjustable from 35% to 100%. It has ports for air entrainment and an immersion-type heater. Empty nebulizers 04-5007P and 04-5207 have FiO2 settings adjustable from 28% to 98%

Our prefilled nebulizers provide performance and ease of use. You can obtain heated and cool high-output aerosols adjustable from 28%-100% FiO2. Includes solution. Features: * Adjustable from 28%-100% FiO2 * Sterile Water for Inhalation (#04-CK0010) * Sodium Chloride for Inhalation, USP (#04-CK4510)

Nebulizer features include: * Designed for comfortable administration of fine mists of uniform density to reach deep into lung cavity * Unique "T" piece allows patient to leave nebulizer in the mouth while exhaling * Attaches to aerosol face mask or face tent and can be hand operated or compressed air driven with a compressor * Break-resistant nebulizer that easily disassembles for sterilization by using one of the following methods: autoclaving, boiling, or cold sterilization * MMAD 5 microns