B & B Medical Technologies

Universal Bite Block (Adult) features include: * Easy and quick application for time sensitive conditions * Packaged with securing device * Provides convenient access for oral care, suctioning and procedures * Well-tolerated by patients * Designed for use in the Critical Care, Surgery, Emergency Room and Transport * Accommodates all endotracheal tube sizes 5 to 9.5 mm

HOPE™ Nebulizer features include: * Quick connection to flowmeter * Easy and quick application for time sensitive conditions * Hypoallergenic materials * Twist off Reservoir for easy medication changes * Standard Auxiliary Port for delivery of therapeutic gases * Dosing chart provided with each HOPE Nebulizer * Delivers medication therapy and humidification for up to 8 hours * Easy to understand dosing chart * Designed for use in the Critical Care Units, Emergency Department, Extended Care Clinics, Outpatient Clinics and in hospital Transport * Accommodates Auxiliary port for delivery of supplemental heliox gas for therapy

TrachStay™ features include: * Minimizes therapist time for set up and connection * Easy and quick application to all tracheostomy collars * Designed for use in the ICU, Critical Care, PICU * Designed for use in Sub Acute, Rehab and Home Care * Assures Trach to Ventilator connection * Reduces potential therapist exposure to contaminated tubing moisture * Can be used while intubated and delivery of supplemental oxygen therapy * Can be used with trach collars

The B&B Bubbler Water Seal CPAP Valve provides a proven method of delivering 0 – 10 cm H2O continuous positive airway pressure (CPAP) for use with infants weighing < 10 kg. The CPAP is adjustable from 1 to 10 cm H2O with gas flow from 1 to 12 liters per minute with accuracy of +/- 1 cm of H2O. The B&B Bubbler is intended to provide CPAP to spontaneously breathing neonates and infants who require breathing support due to conditions associated with prematurity or other conditions where CPAP is prescribed by a physician. The patent-pending B&B Bubbler's design allows airway pressure to be set without the cumbersome and time-consuming tasks normally associated with bubble CPAP devices.A dual-chambered wall allows the fluid level to be observed without disrupting therapy. The B&B Bubbler also has an internal-drainable overflow chamber that limits fluid level within the optimal range. A fill port is provided for adding fluid without disengaging the circuit and the rotating CPAP dial with setting lock reduces risk of inadvertent setting changes.The B&B Bubbler can be used in all neonatal critical care units, delivery rooms and special procedure units.

ET Tape™ features include: * Pre-cut tape minimizes clinician time for preparation and application * Easy and quick application for time sensitive conditions * Non absorbent material to reduce tube slippage * Complete package for immediate use includes Tape, Skin Prep and Cable Tie * Enhanced durability for endotracheal tube protection and position * Children through Adult Application * Oral or Nasal Application * Designed for use in the Critical Care Units, Special Procedure Units, Operating Rooms, Emergency Departments and Transport situations * Accommodates patients greater than 40 pounds and patients less than 300 pounds * Used for endotracheal tubes 4mm and greater

Bite Proof Bite Block™ features include: * Easy and quick application for time sensitive conditions * Packaged with securing device * Provides convenient access for oral care, suctioning and procedures * Well-tolerated by patients * Designed for use in the Critical Care, Surgery, Emergency Room and Transport * Accommodates all endotracheal tube sizes 5 to 9 mm

Baby Tape Plus™ is a pre-cut endotracheal tube holder made from a non-irritating, latex free hydrocolloid adhesive that is skin friendly for infants. Hydrocolloid tape safely secures and contours to the baby's tender skin while the adhesive tape firmly attaches to the endotracheal tube. Baby Tape Plus is designed to be quick and simple to use in a wide variety of situations. The larger wing tabs cover a bigger surface area for greater security, can be trimmed to fit a wide range of infants. The middle tape strips can also be used to secure nasogastric/orogastric tubes and cannulas. Key Benefits: * Hydrocolloid adhesive is gentle on babies' delicate skin * Hypoallergenic, non-irritating, latex free materials minimzing skin reactions * Individual packages contain two tapes each * Stays in place during routine patient movement and transport * Easy and quick application for time sensitive conditions * Circular tube wrap makes for a cleaner, easier application * Recommended for use with patients less than or equal to 10kg

LockTite™ features include: * Secures ET tubes without adhesive tape * Pre-assembled minimizes clinician time for preparation and application * Easy and quick application for time sensitive conditions * Prepackaged Kit with needed tools for securing the endotracheal tube * Complete package for immediate use includes Foam retaining unit and Cable Tie * Children through Adult Application * Oral or Nasal Application * Designed for use in the Critical Care Units, Burn Units, Special Care Units, and Emergency Departments * Accommodates patients greater than 40 pounds and patients less than 400 pounds * Used for endotracheal tubes 4mm and greater

ET Tape II™ features include: * Non absorbent material reduces tube slippage * Prepackaged kit for immediate use includes tape, skin prep and Releasable Cable Tie * Easy and quick application for time sensitive conditions * Used for endotracheal tubes 4 mm and greater * Child through adult application * Oral or nasal application * Designed for use in critical care and special procedure units, operating rooms, emergency and transport situations * Accommodates patients weighing 40 to 300 pounds

TrachGuard™ kit features include: * Pre-packaged kit minimizes therapist time * Easy and quick application of the TrachGuard to the tracheostomy flange and around the ventilator circuit with Velcro® fasteners * Comfortable Foam Collar fits pediatric through adult patient * Prepackaged Kit with collar and anti-disconnect device * Designed for use in the PICU, Critical Care, Sub-Acute and Home Care * Foam collar accommodates all patients with neck sizes 7 to 18 inches * Can be used while intubated and delivery of supplemental oxygen therapy

StabilTube™ features include: * Pre-cut tape minimizes clinician time for preparation and application * Easy and quick application for time sensitive conditions * Non absorbent material to reduce tube slippage * Readjust with the flexible Velcro neckband for change in patient condition * Prepackaged Kit with needed tools for securing the endotracheal tube * Complete package for immediate use includes Tape, Skin Prep and Cable Tie * Children through Adult Application * Oral or Nasal Application * Designed for use in the Critical Care Units, Special Procedure Units, Operating Rooms, Emergency Departments and Transport situations * Accommodates patients greater than 40 pounds and patients less than 300 pounds * Accommodates neck size up to 26 inches (C Collar application) * Used for endotracheal tubes 4mm and greater

Accutach™ Pneumotach Flow Sensor The Accutach sensor is a latex free, hypo-allergenic, flow sensing device. When placed in the line of the ventilator circuit the sensor accurately measures flow, volume, and pressures delivered to the patient. This disposable device provides differential pressure signals through the sensor ranges, precisely measuring ventilator settings and assuring the integrity of the patient circuit. The Accutach operates at the distal end of the ventilator circuit, locate between the patient Y and the endotracheal tube. The small dead space of 11 cc and the Accutach's light weight provide ideal patient monitoring. The Accutach comes as a complete package with a Flow Sensor, a pair of 72-inch color-coded ventilator panel lines, a 15 mm ID – 22 mm OD adapter, and a 22 mm tubing clip. Each device is packaged clean and must be calibrated prior to use. The Accutach was designed to work with the H7200 VR-1 monitor and the Galileo®, Amadeus&

Universal Bite Block (Pediatric) features include: * Easy and quick application for time sensitive conditions * Packaged with securing device * Provides convenient access for oral care, suctioning and procedures * Well-tolerated by patients * Designed for use in the Critical Care, Surgery, Emergency Room and Transport * Accommodates all endotracheal tube sizes 4 to 6 mm

B&B Adult Test Lung 1.0L™ Quality silicone lung provides nominal level of resistance; included elbow connector adapts to all patient circuits. The B&B Adult Test Lung 1.0 L provides an economical choice for providing high quality demonstration applications on mechanical ventilators for adult patients. The B&B Adult Test Lung simulates the respiratory system, providing nominal levels of resistance and compliance. Each comes packaged with a 1.0 latex-free silicone ventilation bag and an elbow connector. Each bag is durable, easily removable and can be cleaned or sterilized as needed. The B&B Adult Test Lung comes with a standard fitting 15 mm ID x 22 mm OD elbow connector that adapts to all patient circuits. The B&B Adult Test Lung is compact in design and lightweight. It is the ideal tool for demonstrations in respiratory care, biomedical labs and anesthesia departments. B&B products are designed for ease of use, simplicity of operation and cost effective solu

B&B NEO2-SAFE Infant Ventilator Circuit Manifold with Suction Port provides an interface between the ventilator circuit and the endotracheal tube maintaining a closed circuit during various procedures. The manifold fits all neonatal circuits. The suction port consists of a Duckbill valve made of silicone. The manifold is manufactured with a latex-free, hypo-allergenic material. When infants are disconnected from the ventilator for specific procedures, i.e., suctioning, many infants rapidly desaturate due to the loss of positive end-expiratory pressure (PEEP) and their inability to maintain FRC. A method to allow for suctioning without disconnect from the ventilator circuit may prevent or minimize this occurrence. The NEO2-SAFE valve used in line with a 10 mm ventilator circuit allows access for suctioning without disconnect from the ventilator effectively reducing the potential for hypoxemia associated with open circuit suctioning. The NEO2-SAFE maintains PEEP or CPAP during suction procedures. The NEO2-SAFE manifold has an additional function, to provide access via catheter insertion for instillation of surfactant. A catheter can be passed into the infant® endotracheal tube without interruption of ventilation by passing the catheter through the port on the NEO2-SAFE valve. The NEO2-SAFE Infant Ventilator Circuit Manifold with Suction Port maintains a closed airway circuit system by sealing the valve around the catheter. Peer Reviewed articles support the effectiveness of the NEO2-SAFE for suctioning and instillation of peripheral medication via catheter. The NEO2-SAFE is intended for single patient use application and should not be reused. * Convenient * Adapts to Infant Ventilator Circuits (10 mm)/reusable or single patient use * Easy access to the airway for suction procedure via the Duckbill valve

NeO2-Safe fits standard neonatal circuits and is manufactured from latex free, hypoallergenic materials. NeO2-Safe Infant Ventilator Circuit Manifold with access port maintains a closed airway circuit system by sealing the valve around the catheter. The access port is a Duckbill valve made of medical gradesilicone. *Cap not included.

The B&B Single Pole Clamp is a sturdy pole clamp that works in tandem with the B&B Bubbler Water Seal CPAP Valve 0 – 10 cm H2O. The B&B Single Pole Clamp is intended to support up to 3.6 kg in weight, just right for the B&B Bubbler. The B&B Single Pole Clamp is ISO compliant for mounting on poles 2.0 to 3.2 cm in diameter. Key Features: * Easy and quick application with knob-hand tightening mechanism to standard equipment pole * Easily cleaned between uses * Sturdy clamp that can be used with multiple devices * Compatible with the B&B Bubbler Water Seal CPAP Valve * Designed for use with the B&B Bubbler, humidifiers or other devices

The 12.5 cm H2O Pressure Relief Manifold is a single-use device for use with patients weighing less than 10 kg requiring a fresh gas inlet, oxygen sensor port and a pressure limitation system. The manifold relieves pressure in excess of 12.5 cm H2O. Each manifold comes with 12.5 cm H2O pressure relief valve, gas supply line and capped oxygen sensor port. The 22 mm ID inlet is compatible with all humidifier chambers. Pressure Relief Manifolds are made of latex- and phthalate-free materials. Key Features: * Accurate 12.5cm H2O pressure relief for use with patients less than 10kg * Latex and phthalate free material * Packaged with gas supply line for additional gas source * Eliminates costs associated with correcting excessive pressure in the circuit * Fixed pressure limiting system at 12.5 cm H2O * Integrated oxygen analyzer sensor port * Compatible with all humidifier chambers * Complete package can be used in all neonatal and pediatric critical care units, delivery rooms and special procedures units