Humidification & Nebulization

Humidifier features include: * Dry * 350 cc * High-Flow * Bubble

The Curaplex® Nebulizer and Humidifier Heaters are capable of higher patient-end temperatures and are recommended for use with high flow applications. Features: * For use with Curaplex Nebulizers or Heaters * Power supply: 115 volts California Proposition 65 Warning: ⚠ WARNING: This product may use 'Clear Vinyl” in the manufacturing process and therefore may contain one or more chemicals on the Prop. 65 chemical list which are known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

Bracket for the P2000 heater.

The Curaplex® Humidifier Wick System is designed for use with the Curaplex® Heater (301-P2000) to provide ventilated patients with active humidification. For single patient use. This item is disposable. Features: * Disposable * Single Patient Use * Use with Curaplex® Heater (301-P2000) California Proposition 65 Warning: ⚠ WARNING: This product may use 'Clear Vinyl” in the manufacturing process and therefore may contain one or more chemicals on the Prop. 65 chemical list which are known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

High Flow Humidifier features include: * 360° molded, low resistance, high output diffuser head design * Special diffuser and relief valve design delivers high flows with minimum internal resistance * Pressure relief valve that automatically resets * Audible pressure relief alert * Jar permanently marked in large print, minimum/maximum water levels * Easy seal, translucent, double helix thread jar * Domed lid is two tone beige and black

Low compliance Single and Dual heated wire breathing systems for Invasive and Non-Invasive therapies, delivering gas at optimal humidity and temperature to patients requiring respiratory support. All Heated Wire Breathing Systems limbs feature a double coiled heated wire configuration providing a consistent warming of gas flow and limb wall minimizing possible rain-out. Features: * Available with multiple components * Sterile packed breathing systems * Double coiled heated wires

The closed system design of these flexible solution bags helps minimize the possibility of contamination to your patients. When solution bags are attached to the appropriate feed sets, replenishing empty nebulizers and refilling chambers are simplified. The easy one-step set-up offers convenience and reduces patient interruptions. The solution bags contain sterile water for inhalation, USP, and are available in two sizes: 1,000 and 2,000 mL.

These Dry Bubble Humidifiers provides effective and consistent results for your patients across the entire clinical flow range and incorporate unique features to address your everyday requirements. With the included High Flow Comfort Soft Plus™ Cannula, maximum comfort for the patient while virtually eliminating ear ulceration combined with a High Flow Humidifier that vastly reduces splash and residual solution in your oxygen tubing. Flow rates are not compromised by restrictions and resistance caused by excess condensate in the tubing, a common occurrence with industry competition.Features: * Pressure Relief ValveHumidifier Jar Engraved with Minimum/Maximum Water Level PointsUnique Baffling System to Minimize Splash Exiting into the TubeInterfaces with Oxygen Concentrator, Liquid O2 Systems, O2 Tanks and Wall Outlet ApplicationsHome Care, Hospital & Alternate Care Applications Recommended Flow Rates of up to 15 LPM

AQUAPAK® prefilled humidifiers combine an easy-to-use adapter with choice of two sterile water reservoir bottle sizes. The micro-diffuser produces smaller bubbles and greater surface agitation for quiet operation and high humidity output. Humidifier adapters incorporate audible alarm to alert clinician to flow restriction or occlusion of humidifier or tubing. Reservoir bottles have built-in oxygen tubing connectors.

Unit Dose features include: * Saline (0.9% NaCL) * for Inhalation * Graduated Vial

These Dry Bubble Humidifiers provides effective and consistent results for your patients across the entire clinical flow range and incorporate unique features to address your everyday requirements. With the included High Flow Comfort Soft Plus™ Cannula, maximum comfort for the patient while virtually eliminating ear ulceration combined with a High Flow Humidifier that vastly reduces splash and residual solution in your oxygen tubing. Flow rates are not compromised by restrictions and resistance caused by excess condensate in the tubing, a common occurrence with industry competition.Features: * Pressure Relief ValveHumidifier Jar Engraved with Minimum/Maximum Water Level PointsUnique Baffling System to Minimize Splash Exiting into the TubeInterfaces with Oxygen Concentrator, Liquid O2 Systems, O2 Tanks and Wall Outlet ApplicationsHome Care, Hospital & Alternate Care Applications Recommended Flow Rates of up to 15 LPM

AQUAPAK® prefilled nebulizer is a versatile sterile system to provide cold or heated nebulization. It is a closed sterile water system. Benefits: * Increased safety in hygienic application * Facilitates daily handling * Efficiency and economy * Delivers humidified gas in concentrations ranging from 28% to 98%

These Dry Bubble Humidifiers provides effective and consistent results for your patients across the entire clinical flow range and incorporate unique features to address your everyday requirements. Features: * Pressure Relief ValveHumidifier Jar Engraved with Minimum/Maximum Water Level PointsUnique Baffling System to Minimize Splash Exiting into the TubeInterfaces with Oxygen Concentrator, Liquid O2 Systems, O2 Tanks and Wall Outlet ApplicationsHome Care, Hospital & Alternate Care Applications Recommended Flow Rates of up to 15 LPM

Humidifier Tubing features include: * Disposable * 3-feet

Sterile Water features include: * For Inhalation USP * Universal Pour Bottle

The AQUATHERM® III is an adjustable, external heater electronic heater for thermal humidification (nebulization) to be used with AQUAPAK® Nebulizer systems.

Suitable for invasive or non-invasive ventilation and heated or non-heated wire breathing circuits. Fully automatic for simple and rapid set-up, the FL-9000U Respiratory Humidifier has many advanced features, including the ability to change airway and chamber temperature settings within a given range, a selectable temperature display, alarm panel with location indicators and a range of safety features. Features: * Easy-connect wire and probe sockets of different design ensure correct connection. * Clear easy-to-read LED Display with the option to check Airway, Chamber or Heater Plate Temperature, or hold on a preferred parameter. * Comprehensible, color-coded identification lights for quick clinical resolution.

High Flow Cannula and Humidifier Kit features include: * 360° molded, low resistance, high output diffuser head design * Special diffuser and relief valve design delivers high flows with minimum internal resistance * Pressure relief valve that automatically resets * Audible pressure relief alert * Jar permanently marked in large print, minimum/maximum water levels * Easy seal, translucent, double helix thread jar * Domed lid is two tone beige and black * Enhanced reservoir facepiece * bright green supply tubing * Includes 77-1600HF and 77-7900

AQUAPAK® prefilled humidifiers combine an easy-to-use adapter with choice of two sterile water reservoir bottle sizes. The micro-diffuser produces smaller bubbles and greater surface agitation for quiet operation and high humidity output. Humidifier adapters incorporate audible alarm to alert clinician to flow restriction or occlusion of humidifier or tubing. Reservoir bottles have built-in oxygen tubing connectors.

Dual heated wire humidifier adapter lead for the FL-9000U Respiratory Humidifier.

AirLife® prefilled humidifier features a dual-purpose reservoir with a snap-open trigger, which makes opening for secure attachment of humidifier adapter (included). Oxygen pathway designed to help prevent particulate from reaching oxygen delivery tubing. Audible relief valve warns if the patient´s tubing becomes occluded. Designed for convenient shelf storage, humidifier has a multiangle outlet port that prevents spitting, even at high flow rates, and a small bottle opening that prevents refilling. Includes an adapter and 4 psi pressure-relief valve with alarm.

AQUAPAK® prefilled humidifiers combine an easy-to-use adapter with choice of two sterile water reservoir bottle sizes. The micro-diffuser produces smaller bubbles and greater surface agitation for quiet operation and high humidity output. Humidifier adapters incorporate audible alarm to alert clinician to flow restriction or occlusion of humidifier or tubing. Reservoir bottles have built-in oxygen tubing connectors.

Bags of Sterile Water for Inhalation and IV solutions can be easily confused, especially a 1-liter bag of 0.9% sodium chloride injection. The AMSure® Hanging Spikeable Bottle solves the problem of look-alike solution 'bags” and prevents mishaps from occurring. Benefits: * Rigid, plastic material easy to squeeze for priming * Hangar is located on the bottom of the bottle * 100% recyclable High-Density Polyethylene Features: * 1000mL Sterile Water for inhalation, USP * Used in heated humidifiers and high-flow oxygen therapy * Inverted label * Use with vented spikes only

The AQUA+® Hygroscopic Condenser Humidifiers (HCH) incorporate the lastest advances in material technology to provide humidifiers with optimal moisture output, minimal dead space and low resistance to flow. The AQUA+ HCH line utilizes a fiber-free, cellular hygroscopically treated media.AQUA+ TS features: * Designed for spontaneously breathing tracheostomy patients, includes built-in supplemental oxygen port * Includes port for convenient suctioning * 75-1000 ml Vt Range * 24 mgH20/L, Vt = .5L Moisture Output * 0.2 cmH20, 60 LPM Resistance * 15 ml Dead Space