Heaters & Accessories

The Curaplex® Nebulizer and Humidifier Heaters are capable of higher patient-end temperatures and are recommended for use with high flow applications. Features: * For use with Curaplex Nebulizers or Heaters * Power supply: 115 volts California Proposition 65 Warning: ⚠ WARNING: This product may use 'Clear Vinyl” in the manufacturing process and therefore may contain one or more chemicals on the Prop. 65 chemical list which are known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

Bracket for the P2000 heater.

Low compliance Single and Dual heated wire breathing systems for Invasive and Non-Invasive therapies, delivering gas at optimal humidity and temperature to patients requiring respiratory support. All Heated Wire Breathing Systems limbs feature a double coiled heated wire configuration providing a consistent warming of gas flow and limb wall minimizing possible rain-out. Features: * Available with multiple components * Sterile packed breathing systems * Double coiled heated wires

Humidifier Tubing features include: * Disposable * 3-feet

The AQUATHERM® III is an adjustable, external heater electronic heater for thermal humidification (nebulization) to be used with AQUAPAK® Nebulizer systems.

Suitable for invasive or non-invasive ventilation and heated or non-heated wire breathing circuits. Fully automatic for simple and rapid set-up, the FL-9000U Respiratory Humidifier has many advanced features, including the ability to change airway and chamber temperature settings within a given range, a selectable temperature display, alarm panel with location indicators and a range of safety features. Features: * Easy-connect wire and probe sockets of different design ensure correct connection. * Clear easy-to-read LED Display with the option to check Airway, Chamber or Heater Plate Temperature, or hold on a preferred parameter. * Comprehensible, color-coded identification lights for quick clinical resolution.

The Double Valve Auto-Fill Humidification Chamber is part of a complete system to warm and humidify inspired respiratory gases delivered to ventilated patients and those receiving respiratory support. The chamber is used in conjunction with a respiratory humidifier, breathing circuits and other accessories such as CPAP masks, high flow cannulas and nasal CPAP accessories. Features: Improved Responsiveness The lower water capacity enables rapid achievement of optimum operating temperature and minimizes fluctuations. Highly Compatible 22mm connectors allow compatibility with a wide range of ventilator circuits. Gas Flow Diverters Flow diverters optimize gas flow through the chamber, maximizing efficiency of warming and humidification of the gases. Heat Transfer Flat aluminium base for efficient, rapid and responsive water heating. Clear Construction Transparent construction with red floating fill indicator and clear markings for quick and easy monitoring of the water level. Compatible with Oscillating Ventilators The humidifier chamber is tested and performs with oscillating ventilators used in neonatal treatment. Overfill Protection Flexicare's Double Valve Auto-Fill Humidification Chamber features two independent floats and a primary and a secondary seal to regulate the flow of water into the chamber and provide assured protection against overfilling.

Kit, Therapy, Oxygen, High Flow

VentiMyst® Advanced Active Humidification delivers absolute humidity and manages excess rain-out. Adult breathing circuits (1.6m) with single or dual heated wires. Effective Moisture Management The VentiMyst® technology reduces the build up of rain-out. Clinical Confidence Reduced need to open or break the circuit with associated loss of PEEP and de-recruitment of the lungs. Sterile Packed All VentiMyst Heated Wire Breathing Systems are supplied sterile for superior patient safety. Efficient Temperature Transfer Helps prevent gas temperature loss and surface cold spots, minimizing rain-out. Low Compliance Tubing Accurate delivery of gas volumes and ventilation pressures to the patient. Reduced Risk Reduced risk of accidental drainage of rain-out into the patient's airway.

Single heated wire humidifier adapter lead for the FL-9000U Respiratory Humidifier.

Dual heated wire humidifier adapter lead for the FL-9000U Respiratory Humidifier.

Column, Concha, Only, No Water

The adult dual limb ConchaSmart® circuits are breathing circuits designed to reduce circuit breaks and streamline clinician efficiency, and include a clear wye helping clinicians confirm optimal humidity. Each ConchaSmart® circuit includes a ConchaSmart® column.

Ultra-fine disposable filter for Dreamstation PAP Therapy System.

AirLife® aerosol drainage bag with Y adapter collects moisture accumulating from continuous in-line aerosol therapy. Composed of durable vinyl, the bags attach to a trach tee or a patient "Y." Drainage bag with 2L capacity includes hanger and bottom drainage port.

Humidifier Connector Tube is a replacement/accessory part.

Humidifier Adaptor, 040

The HG 100 Humidifier Guard is designed to be used with humidifiers in ventilator circuits. It allows the safe removal of condensation and patient secretions from the inspiratory limb of a ventilator circuit to be collected and then easily removed by suction when necessary. As a result, there is no potential pressure loss in the ventilator circuit. The HG 100 Humidifier Guard CAN NOT be used during Magnetic Resonance Imaging (MRI) as some parts of the assembly are magnetic Features: * Single Patient Use * Maximum amount of collected fluids is 40ml * No potential pressure loss in the ventilator circuit * CANNOT be used during Magnetic Resonance Imaging (MRI) Dimensions: * Height: 3.25 in. (83mm) * Width: 3.5 in. (89mm) * Inlet Port: 22mm I.D. * Outlet Port: 22mm O.D. * Suction Port: 5/16 in. O.D. * Temperature Probe Port: 7.5mm I.D. Materials: * Body: Polycarbonate * Caps: Thermoplastic Elastomer * Color: Clear * Not made with Natural Rubber Latex * Not made with Di(2-ethylhexyl) phthalate (DEHP)

Mounting accessory pole clamp (30-55mm) for the FL-9000U Respiratory Humidifier.

Humidifier flip lid seal for the DreamStation PAP Therapy System.

Mounting accessory c-clamp (19-40mm) for the FL-9000U Respiratory Humidifier.