Ventilation Tubing & Accessories

Philips Non-Invasive (NIV) Disposable Non-Heated Circuit features a single-limb, non-heated passive circuit with a swivel exhalation port and machine-side filter. Features: * Adult * 22mm * Non-heated * Swivel exhalation port * Machine-side filter Use with Philips NIV Devices: * Use with Trilogy 202, V30, BiPAP Focus, EV300 without modifications * Use with V60 or BiPAP Vision a proximal pressure line must be added

Corrugated Tubing is blue in color and segmented.

This pressure valve is an O2 accessory part to be used with the Philips BiPAP / CPAP Vision units. It is available as a single (each) item or a pack of 5. Features: * Oxygen Accessory Part * Use with Philips BiPAP / CPAP Vision Units

Disposable Exhalation Port (DEP) features include: * Ventilation circuit accessory * Does not include filter

Standard exhalation port to one that accepts a filter.

Particulate Filter for Trilogy EV300.

Low compliance Single and Dual heated wire breathing systems for Invasive and Non-Invasive therapies, delivering gas at optimal humidity and temperature to patients requiring respiratory support. All Heated Wire Breathing Systems limbs feature a double coiled heated wire configuration providing a consistent warming of gas flow and limb wall minimizing possible rain-out. Features: * Available with multiple components * Sterile packed breathing systems * Double coiled heated wires

Tubing fits instruments made by Collins, Jaeger, Medical Graphics, Sensormedics. Tubes are individually bagged, clean - not sterile. Tubes made from ethylene vinyl acetate, contain no latex. Temperature range from -35 deg C to +60 deg C.

Disposable, lightweight tubing featuring a corrugated exterior with a smooth interior. Features: * No internal corrugates for condensate to collect in * Smooth interior offers quiet passage of airflow even at high flow rates * 22-mm inside diameter adapts to most respiratory therapy applications * Individually packaged

AirLife® disposable corrugated tubing for aerosol and IPPB applications offers flexibility and convenience to meet therapeutic needs. Composed of polyethylene/ethyl vinyl acetate (EVA) plastic for strength and drapability. Cuffs on all tube ends lock to 7/8 inch connections.

Replacement Air Inlet Foam Filter for Trilogy EV300.

The Double Valve Auto-Fill Humidification Chamber is part of a complete system to warm and humidify inspired respiratory gases delivered to ventilated patients and those receiving respiratory support. The chamber is used in conjunction with a respiratory humidifier, breathing circuits and other accessories such as CPAP masks, high flow cannulas and nasal CPAP accessories. Features: Improved Responsiveness The lower water capacity enables rapid achievement of optimum operating temperature and minimizes fluctuations. Highly Compatible 22mm connectors allow compatibility with a wide range of ventilator circuits. Gas Flow Diverters Flow diverters optimize gas flow through the chamber, maximizing efficiency of warming and humidification of the gases. Heat Transfer Flat aluminium base for efficient, rapid and responsive water heating. Clear Construction Transparent construction with red floating fill indicator and clear markings for quick and easy monitoring of the water level. Compatible with Oscillating Ventilators The humidifier chamber is tested and performs with oscillating ventilators used in neonatal treatment. Overfill Protection Flexicare's Double Valve Auto-Fill Humidification Chamber features two independent floats and a primary and a secondary seal to regulate the flow of water into the chamber and provide assured protection against overfilling.

Extension tube features include: * Extends from 4 cm to 13 cm to minimize dead space for each application * Holds shape to allow better positioning and maintain placement * Lightweight - reduces torque and circuit weight * Supplied clean and individually packaged

Elbow Adaptor, 22mm ID x 22mm OD

A range of self-sealing and right-angled, self-sealing water traps that allow for emptying during use. As the base of the water trap is opened the internal valve automatically closes ensuring the breathing system remains airtight. As the base is replaced, the valve reopens allowing drainage of the breathing system to recommence. The right-angled version is ideal for use in applications where a 90º attachment may be required.

Gas Input Hose designed for use with: * paraPAC™ and ventiPAC™ ventilators * babyPAC™ ventilators

Disposable Patient Valve to be used with * paraPAC Ventilator * ventiPAC Ventilator

Protective Cap features include: * 22 mm ID * Non-Sterile * Accessory Part

Passive bilevel breathing systems are available in Smoothbore tubing as they offer a perfect solution for dry, high-flow gas. Features: * Multiple tubing lengths * Choose between ports or connector

The Superset range of catheter mounts have a concertina design to allow for positioning control. This allows the catheter mount to be set in any required position. The design allows the adjustment of deadspace from 20ml to 40ml (code 3504: 15-36ml) and the adjustment of length from 70mm to 150mm, excluding connectors (code 3504) for total control. The range is available with fixed and swivel elbows and a variety of ports for all applications. All Intersurgical port caps are retainable for safety; fixed to the port connectors to ensure that they cannot be misplaced in use. Flip top cap with 7.6mm port - for connection of all standard 7.6mm probes or suctioning. Luer ports - for secure attachment of gas sampling lines with luer lock fittings. Double flip top cap with seal - opening the first tab on the cap allows for the introduction of a fiber optic bronchoscope whilst maintaining airway pressure. Opening the second tab allows for suctioning if required.

Pole Mounting Clamp for: * paraPAC™ * ventiPAC™ * babyPAC™

Introducing Intersurgicals new right-angled water traps for the collection of condensation.Ideal for use in applications where a 90° attachment may be required. The self-sealing facility allows the water trap to be emptied without interrupting flow. Features a 22ID machine-side connection to a 22OD breathing system-side connection, and can be attached directly to a ventilator or to an anesthetic machine. * Right-anged * 70mL Medium Volume

A range of double swivel elbows providing added mobility at the patient connection, with a variety of ports for all applications. All Intersurgical port caps are retainable for safety; fixed to the port connectors to ensure that they cannot be misplaced in use. Flip top cap with 7.6mm port - for connection of all standard 7.6mm probes or suctioning. Double Flip top cap with seal - opening the first tab on the cap allows for the introduction of a fibre optic bronchoscope whilst maintaining airway pressure. Opening the second tab allows for suctioning if required.

Exhalation Port features include: * 22 mm OD x 15 mm ID * Disposable