Ventilation Tubing & Accessories

Philips Non-Invasive (NIV) Disposable Non-Heated Circuit features a single-limb, non-heated passive circuit with a swivel exhalation port and machine-side filter. Features: * Adult * 22mm * Non-heated * Swivel exhalation port * Machine-side filter Use with Philips NIV Devices: * Use with Trilogy 202, V30, BiPAP Focus, EV300 without modifications * Use with V60 or BiPAP Vision a proximal pressure line must be added

Standard exhalation port to one that accepts a filter.

Corrugated Tubing is blue in color and segmented.

Particulate Filter for Trilogy EV300.

Disposable Exhalation Port (DEP) features include: * Ventilation circuit accessory * Does not include filter

Exhalation Port features include: * 22 mm OD x 15 mm ID * Disposable

Low compliance Single and Dual heated wire breathing systems for Invasive and Non-Invasive therapies, delivering gas at optimal humidity and temperature to patients requiring respiratory support. All Heated Wire Breathing Systems limbs feature a double coiled heated wire configuration providing a consistent warming of gas flow and limb wall minimizing possible rain-out. Features: * Available with multiple components * Sterile packed breathing systems * Double coiled heated wires

Replacement Air Inlet Foam Filter for Trilogy EV300.

The Double Valve Auto-Fill Humidification Chamber is part of a complete system to warm and humidify inspired respiratory gases delivered to ventilated patients and those receiving respiratory support. The chamber is used in conjunction with a respiratory humidifier, breathing circuits and other accessories such as CPAP masks, high flow cannulas and nasal CPAP accessories. Features: Improved Responsiveness The lower water capacity enables rapid achievement of optimum operating temperature and minimizes fluctuations. Highly Compatible 22mm connectors allow compatibility with a wide range of ventilator circuits. Gas Flow Diverters Flow diverters optimize gas flow through the chamber, maximizing efficiency of warming and humidification of the gases. Heat Transfer Flat aluminium base for efficient, rapid and responsive water heating. Clear Construction Transparent construction with red floating fill indicator and clear markings for quick and easy monitoring of the water level. Compatible with Oscillating Ventilators The humidifier chamber is tested and performs with oscillating ventilators used in neonatal treatment. Overfill Protection Flexicare's Double Valve Auto-Fill Humidification Chamber features two independent floats and a primary and a secondary seal to regulate the flow of water into the chamber and provide assured protection against overfilling.

SMOOTH-FLO® CORR-A-TUBE® disposable tubing has a smooth internal surface to help prevent water from collecting in ridges. Its 22mm inside diameter end fitting adapts to most respiratory therapy applications.

Tubing fits instruments made by Collins, Jaeger, Medical Graphics, Sensormedics. Tubes are individually bagged, clean - not sterile. Tubes made from ethylene vinyl acetate, contain no latex. Temperature range from -35 deg C to +60 deg C.

Extension tube features include: * Extends from 4 cm to 13 cm to minimize dead space for each application * Holds shape to allow better positioning and maintain placement * Lightweight - reduces torque and circuit weight * Supplied clean and individually packaged

Elbow Adaptor, 22mm ID x 22mm OD

This 36 inch breathing tube is made of spiral reinforced tubing with 22mm silicone female fittings at both ends.

Circuit Support Arm features include: * Accessory Part * Supports Patient Circuit

Carrying Case features include: * Electric Blue * Black Shoulder and Carry Straps * Molded Hangers for Stretchers

Protective Cap features include: * 22 mm ID * Non-Sterile * Accessory Part

Lithium Battery features include: * MRI Compatible * 3.6 Volt

Disposable Patient Valve to be used with * paraPAC Ventilator * ventiPAC Ventilator

The Superset range of catheter mounts have a concertina design to allow for positioning control. This allows the catheter mount to be set in any required position. The design allows the adjustment of deadspace from 20ml to 40ml (code 3504: 15-36ml) and the adjustment of length from 70mm to 150mm, excluding connectors (code 3504) for total control. The range is available with fixed and swivel elbows and a variety of ports for all applications. All Intersurgical port caps are retainable for safety; fixed to the port connectors to ensure that they cannot be misplaced in use. Flip top cap with 7.6mm port - for connection of all standard 7.6mm probes or suctioning. Luer ports - for secure attachment of gas sampling lines with luer lock fittings. Double flip top cap with seal - opening the first tab on the cap allows for the introduction of a fiber optic bronchoscope whilst maintaining airway pressure. Opening the second tab allows for suctioning if required.

Cable, Sensor, Coiled

A range of self-sealing and right-angled, self-sealing water traps that allow for emptying during use. As the base of the water trap is opened the internal valve automatically closes ensuring the breathing system remains airtight. As the base is replaced, the valve reopens allowing drainage of the breathing system to recommence. The right-angled version is ideal for use in applications where a 90º attachment may be required.

Pole Mounting Clamp for: * paraPAC™ * ventiPAC™ * babyPAC™

Passive bilevel breathing systems are available in Smoothbore tubing as they offer a perfect solution for dry, high-flow gas. Features: * Multiple tubing lengths * Choose between ports or connector