W.T. Farley

Cylinder Holder is for HILL ROM beds and fits over 2 inch thick headboards. Dimensions are 19.5 inches height, 5 inches width and 5.5 inches depth.

Compact 50 PSI Preset Air Regulator has durable brass body construction and a design that helps with tight transport situations.

Deluxe Oxygen Cylinder Cart for HILL Rom Beds and STRYKER beds Durable steel construction 6" steel wheels with ball bearings and rubber treads. Convenient "easy lift" front handle. Heavy duty 3/4" mounting tube designed to fit in IV mounts for hospital beds and gurneys. Designed to work in most bed positions keeping cylinder cart wheels off the ground for quick safe transportation of patient with cylinder.Features:* Ergonomic adjustible height CANE STYLE handle providing patient comfort* Swept back axle for greater stablility* Chrome finish* Mounting bracket slips into IV pole mounts on hospital beds and gurneys* Accessory hook for mask and extra tubing

Single oxygen cylinder holder for E size cylinders is designed to fit IV pole mounts on Hill-Rom and Stryker beds and gurneys.

Features:* All Aluminum construction* Holds two D or E cylinders* White powdercoat finish* Rear Bed hook fits into IV pole mounts on gurneys and beds* Bed Hook allows cart to be hung over bed head and foot rails* Utility hook for hanging masks, cannulas* 6 inch plastic wheels with rubber treads

Oxygen Standard Body Click Regulator has a green ergonomic cylinder tightening knob and a durable brass core body. Flow settings are 0, 1/2, 1, 2, 3, 4, 6, 8, 10, 15, 20, 25. Includes 50 PSI power take-off 90 degree angled outward.

High quality 1 inch diameter stainless steel equipment pole. Five or six-leg heavyweight base, low center of gravity, epoxy powder coated rolling base and 3 inch premium casters (two with brakes). Optional Accessories: * Patient Handle * Electrical Strip * Dual Cylinder Holder

Clamp, Pole Mount, for LTV Vent

Durable chrome plated steel construction allows for stacking cylinders saving valuable floor space. * Durable chrome-plated steel construction * Stacking cylinders up saves valuable floor space * Mix and match cylinder shelves to hold E & M6 diameter cylinders * Cylinders nest in place, thus eliminating cylinder noise * Helps keep your room organized * 5” heavy duty rolling casters with brakes * Dimensions : 26” W x 32” D x 77” H

Durable steel construction with heavy duty adjustable bolt down mounting feet and clean and durable chrome plate finish. * Safe storage solution for gas cylinders * Holds 6 E, D, C, or M9 size cylinders * Includes 4 heavy duty adjustable bolt-down feet (use 3/8” Anchor bolt Not Included) * Durable steel construction * Clean chrome finish * Dimensions 11” W x 16” D x 15” H

Oxygen Regulator, H Cylinder, CGA540, with 0-15 LPM Flowmeter, Power Take Off

The DU-O-VAC is known for its efficacy and easy-to-use convenience without the need for an outlet or batteries. All that is needed is a 50 PSI oxygen source to run two important components to emergency care which includes oxygen and suction in one unique device. Design features include infectious control single use suction canister, a hydrophobic filter built into the single use suction canister, and an easy to read suction gauge for either pediatric model or standard adult version. Unit can be used as an oxygen manifold when suction is not in use. MRI compatible models available.

* Attaches to the DISS outlet of any standard flowmeter * Leak resistant hex style * Tapered notched male barb * Clear color is universal * Works with 3/16" to 5/16" tube ID

Durable conductive hose with 800 PSI burst pressure. Cleaned for air use and meets NFPA99 requirements for conductivity.

Deluxe Pole Mount Blender Bracket fits rails, table tops, and poles from 3/4 inch to 1 1/2 inch diameter.

Cylinder stand, H, T, or M cylinder, 10 in. H x 19 in. W x 18 in. D, steel construction with black wrinkle powder coat finish, heavy duty reversible clamping device secures cylinders from 7 to 9 in.

Carbon Dioxide Regulator, Small Cylinder, 0-100 PSI, Adjustable, Cga940, Yoke Style

Chrome-plated steel construction.

Features:* MRI Compatible* Ergonomic adjustible height CANE STYLE handle providing patient comfort* 6 inch ball bearing wheels* Swept back axle for greater stablility* Chrome finish* Mounting hook hangs over headboards or goes in IV pole bed mounts* Accessory hook for mask and extra tubing* 36 inches Height, 11.75 inched Width, 11.75 inches Depth

It comes with 1 each 50 PSI auxiliary valve, green color coded tee screw and gauge protector.

Oxygen Hose is durable green conductive material, cleaned for oxygen use, burst pressure is 800 PSI, and meets MFPA99 requirements for conductivity.

Oxygen Regulator, 50 PSI Preset Outlet, CGA 870, E Cylinder, Color Coded Green, No Flow Capability

IVS Versa-Stand Series IV poles in a 1 inch diameter. Comes with 5-leg aluminum base and 3-inch monster style premium casters, two with brakes. Features: * 1 inch diameter IV Pole has a polished stainless steel body * Pole telescopes from 66-99 inches * Slow descending telescoping action * 4 hook stainless steel bag hangers * Holds up to 20 pounds of fluid Optional Accessories: * Basket * Patient Handle * Dual Cylinder Holder * MRI Compatible

High quality, stable equipment stand. Five or six-leg heavyweight base (20 lbs), low center of gravity, epoxy powder coated rolling base and 3 inch premium casters (two with brakes). Features: * 1 inch diameter stainless steel pole with standard 42 inch tray height * 5 or 6 leg base * Velcro and necessary hardware to secure your equipment is included Optional Features: * 51 inch tray height * 4-outlet hospital grade electrical strip * Dual O2 cylinder holders