Adapters & Connectors

Curaplex® Flusso™ By Pass and Curaplex® Flusso™ TFI are state-of-the-art adapters designed to maintain a closed ventilator circuit and safer circuit disconnection. The adapters can be used with passive or active humidity systems. Curaplex® Flusso™ By Pass adapter maintains a closed circuit and facilitates a safe disconnection of the patient from the mechanical ventilator during a variety of situations. The adapter allows for a seamless addition of a secondary ventilation source while continuing to maintain a patients' positive end expiratory pressure (PEEP) and potential reduction in exhaled aerosols during ventilator circuit disconnect. Curaplex® Flusso™ TFI enables a safer circuit disconnection by allowing for a temporary interruption of gas flow to maintain a positive end expiratory pressure (PEEP) and potential reduction in exhaled aerosols during ventilator circuit disconnect. Benefits: * Clinical: Prevents alveolar injury during positive pressure ventilation by minimizing circuit disconnections and subsequent lung de-recruitment * Staff Safety: Minimizes staff exposure to organisms with the ventilator circuit * Infection Control: Reduces the potential of introducing organisms into the patients' breathing circuit Curaplex® Flusso™ By Pass Features (301-1978): * Proprietary valve with Swing Valve Technology ™ * Clear housing with colored valve for visualization of function * Reduce torque on the endotracheal tube with the integrated swivel at patient connection * Tethered dust cap to keep ports clean and protect swing valve * Minimal dead space (9cc) * Standard ISO 15/22mm connections Curaplex® Flusso™ TFI Features (301-1979): * Lightweight and compact * Clear housing for visualization of function * Low dead space (1.86 cc) * Activate with minimal effort * Prevent over-compression with safety tabs

Flexible silicone adapter includes 22 mm female ID x 22 mm female ID fittings.

The Superset range of catheter mounts have a concertina design to allow for positioning control. This allows the catheter mount to be set in any required position. The range is available with fixed and swivel elbows and a variety of ports for all applications. All Intersurgical port caps are retainable for safety; fixed to the port connectors to ensure that they cannot be misplaced in use. Flip top cap with 7.6mm port - for connection of all standard 7.6mm probes or suctioning. Luer ports - for secure attachment of gas sampling lines with luer lock fittings. Double flip top cap with seal - opening the first tab on the cap allows for the introduction of a fiber optic bronchoscope while maintaining airway pressure. Opening the second tab allows for suctioning if required.

Intersurgical offers a full range of T-Piece Connectors with optional ports available in 15OD, 15ID, 22OD, and 22ID ISO connections.

Disposable straight connector.

Double swivel elbow 15M - double flip top cap with seal - 22M/15F

This range of various luer ports and connections are for use in breathing systems which do not already contain the respiratory monitoring port connections.

A full range of Venturi valves available individually. The valves are designed to meet the requirements of BS EN 13544-3:2001+A1:2009 and color-coded for easy identification. The printed flow-rate on the valves ensure that, in most cases, the patient receives a total flow of approximately 40 L/min. This is designed to meet the patient's ‘normal' peak flow requirements.

Double Female Luer Lock Adapter. Features: * DEHP Free * Latex-Free * Lipid Resistant * Non-PVC * Priming Volume 0.2mL * Length: 2in

Flexible UltraSet® Double Swivel Elbow features include: * Maximum Internal Diameter * 360 Degree Swivel * Adjustable tubing

Specifications: * Output Range: 10.5 to 15 mV * Response Time: ≤ 15 s * Linearity±: 1% * Exp. Lifetime: > 500,000% O2 hours * Electrical Interface: Molex 22-29-2031 or Equivalent

Swivel adapter features include: * Single Patient Use * 22 mm ID x 15 mm ID/22 mm OD * Polypropylene

Fiber-Optic/Anesthesia connector features include: * Reusable * 15 mm OD equipment connection x 15 mm ID patient connection * Comes with both Suctioning and Fiber-Optic Silicone Rubber Caps * Caps are easily interchanged allowing use of fiber-optic or suctioning equipment * Fiber-optic Cap allows access of fiber-optic bronchoscope without significant loss of PEEP * Smooth surfaces are gentle to expensive bronchoscopy equipment * Silicone rubber caps * Polyetherimide

Adapter, VEOFLO High Flow, Blue Silicone Adapter

T-Piece is an accessory part.

AirLife® two-way connector is precision-molded from a clear, rubber-based resin to ensure an optimal fit and to help avoid cracking, breaking or splintering under stress.

Assembled tee and two one-way valves that allow gas to flow in one direction only.

AMSure® universal adapter is designed to fit standard 15 mm ID/22mm OD connections.

Elbow, Double Swivel,15mm ID/OD,25BX

Fiber-Optic/Anesthesia connector features include: * Reusable * 15 mm OD equipment connection x 15 mm ID/22 mm OD patient connection * Comes with both Suctioning and Fiber-Optic Silicone Rubber Caps * Caps are easily interchanged allowing use of fiber-optic or suctioning equipment * Fiber-optic Cap allows access of fiber-optic bronchoscope without significant loss of PEEP * Smooth surfaces are gentle to expensive bronchoscopy equipment * Silicone rubber caps * Polyetherimide

Luer Lock Cap features include: * Dual Function * for Male and Female Ports * Red

AirLife® sensitive one-way low-resistance flutter valve ensures instant reaction. 22mm OD adapter with tapered hose end contains one-way valve and connects to 22 mm ID tubing. Valve may be removed and reversed as needed. Valves other end may be attached to any 22mm ID fitting as needed. Before using, ensure valve is positioned properly for the direction of flow.