Ventilation Tubing & Accessories

Philips Non-Invasive (NIV) Disposable Non-Heated Circuit features a single-limb, non-heated passive circuit with a swivel exhalation port and machine-side filter. Features: * Adult * 22mm * Non-heated * Swivel exhalation port * Machine-side filter Use with Philips NIV Devices: * Use with Trilogy 202, V30, BiPAP Focus, EV300 without modifications * Use with V60 or BiPAP Vision a proximal pressure line must be added

Exhalation Port features include: * 22 mm OD x 15 mm ID * Disposable

Low compliance Single and Dual heated wire breathing systems for Invasive and Non-Invasive therapies, delivering gas at optimal humidity and temperature to patients requiring respiratory support. All Heated Wire Breathing Systems limbs feature a double coiled heated wire configuration providing a consistent warming of gas flow and limb wall minimizing possible rain-out. Features: * Available with multiple components * Sterile packed breathing systems * Double coiled heated wires

Disposable Exhalation Port (DEP) features include: * Ventilation circuit accessory * Does not include filter

This pressure valve is an O2 accessory part to be used with the Philips BiPAP / CPAP Vision units. It is available as a single (each) item or a pack of 5. Features: * Oxygen Accessory Part * Use with Philips BiPAP / CPAP Vision Units

Tubing fits instruments made by Collins, Jaeger, Medical Graphics, Sensormedics. Tubes are individually bagged, clean - not sterile. Tubes made from ethylene vinyl acetate, contain no latex. Temperature range from -35 deg C to +60 deg C.

SMOOTH-FLO® CORR-A-TUBE® disposable tubing has a smooth internal surface to help prevent water from collecting in ridges. Its 22mm inside diameter end fitting adapts to most respiratory therapy applications.

Corrugated Tubing, Segmented, 100ft, 19mm x 19mm, Pink

Protective Cap features include: * 22 mm ID * Non-Sterile * Accessory Part

The Superset range of catheter mounts have a concertina design to allow for positioning control. This allows the catheter mount to be set in any required position. The design allows the adjustment of deadspace from 20ml to 40ml (code 3504: 15-36ml) and the adjustment of length from 70mm to 150mm, excluding connectors (code 3504) for total control. The range is available with fixed and swivel elbows and a variety of ports for all applications. All Intersurgical port caps are retainable for safety; fixed to the port connectors to ensure that they cannot be misplaced in use. Flip top cap with 7.6mm port - for connection of all standard 7.6mm probes or suctioning. Luer ports - for secure attachment of gas sampling lines with luer lock fittings. Double flip top cap with seal - opening the first tab on the cap allows for the introduction of a fibre optic bronchoscope whilst maintaining airway pressure. Opening the second tab allows for suctioning if required.

The Superset range of catheter mounts have a concertina design to allow for positioning control. This allows the catheter mount to be set in any required position. The design allows the adjustment of deadspace from 20ml to 40ml (code 3504: 15-36ml) and the adjustment of length from 70mm to 150mm, excluding connectors (code 3504) for total control. The range is available with fixed and swivel elbows and a variety of ports for all applications. All Intersurgical port caps are retainable for safety; fixed to the port connectors to ensure that they cannot be misplaced in use. Flip top cap with 7.6mm port - for connection of all standard 7.6mm probes or suctioning. Luer ports - for secure attachment of gas sampling lines with luer lock fittings. Double flip top cap with seal - opening the first tab on the cap allows for the introduction of a fiber optic bronchoscope whilst maintaining airway pressure. Opening the second tab allows for suctioning if required.

Circuit Support Arm features include: * Accessory Part * Supports Patient Circuit

A range of self-sealing and right-angled, self-sealing water traps that allow for emptying during use. As the base of the water trap is opened the internal valve automatically closes ensuring the breathing system remains airtight. As the base is replaced, the valve reopens allowing drainage of the breathing system to recommence. The right-angled version is ideal for use in applications where a 90º attachment may be required.

Replacement Air Inlet Foam Filter for Trilogy EV300.

Corrugated Tubing is blue in color and segmented.

Introducing Intersurgicals new right-angled water traps for the collection of condensation.Ideal for use in applications where a 90° attachment may be required. The self-sealing facility allows the water trap to be emptied without interrupting flow. Features a 22ID machine-side connection to a 22OD breathing system-side connection, and can be attached directly to a ventilator or to an anesthetic machine. * Right-anged * 70mL Medium Volume

Disposable Patient Valve to be used with * paraPAC Ventilator * ventiPAC Ventilator

Disposable Patient Valve to be used with * paraPAC Ventilator * ventiPAC Ventilator

RJ9 to 1/4in nurse call cable, closed, for Trilogy Ventilators.

Pneupac Parapac Plus Carrying Case * Orange * Not MRI Compatible

Gas Input Hose designed for use with: * paraPAC™ and ventiPAC™ ventilators * babyPAC™ ventilators

One-Way Valve features include: * 15 mm ID x 22 mm OD * Non-Sterile * Disposable

Standard exhalation port to one that accepts a filter.

Particulate Filter for Trilogy EV300.